The Olaer Group Worldwide

Our Main Partners

 

BUHLER TANK ACCESSORIES

Nivovent The NIVOVENT range offers in addition to reservoir ventilation and level control, the measurement of the liquids temperature. The NIVOVENT tank top connection is standardised according to DIN 24557 part 2. Dimensions which are already in use world wide, making it possible to update existing systems to incorporate NIVOVENT technology with as little effort as possible. The filter element of the breather is disposable. In case of emergency it is possible to top up with low volumes of oil via the breather housing. The temperature sensor specifications meet the requirements of modern control system and the level contact are easily adjustable. For application example, see our article pro-active leakage control for Hydraulic systems - environmental concerns. - nivovent series

Nivotemp This product range combines the control of both liquid level and temperature. The mounting flange has dimensions according to DIN 24557 part 2 (but has only 3 holes actually drilled) and fits on the six hole 73mm interface used for breather filters around the world, thus making installation simple and cost effective. The level contacts are bi-stable and adjustable For proactive leakage control the unit can be equipped with continuous output of 4-20 mA. Simple and cost effective control of level and temperature. - nivotemp Level switch for internal mounting The control of liquid in reservoirs, gear boxes and other complex constructions often required an externally mounted indicator and means of control. The NS10/25 range of level controls has been designed specially to be used in such applications and offers a very comprehensive range of features. The visual level indicator is a standard item and has a very high degree of visibility from any direction. The indicator itself is housed in a plastic tube and moves in relation to the magnetic field of an unsinkable float located in the liquid through pipe. The electrical level contacts or a continuous output device are mounted on the side of the indicator scale. The contacts can be adjusted at any point. the connection to the main structure can be made by means of standard pipe fittings or flanges. Temperature measurement A stable operating temperature is essential for precise and trouble free operation of hydraulic an lubrication systems, hence the requirements laid down in DIN 24346 for the provision of adequate controls. Modern processor controlled systems can cope with this problem by regulation of the operating temperature within a very narrow span when supplied with accurate, highly responsive signals. OLAER and BUHLER can provide a wide range of temperature sensors. from a simple switch to electronic contact thermometers. These sensors can be mounted to the top tank or side wall. The "wet" part remains in the reservoir whilst the "dry" part can be inspected thus eliminating the need to drain the reservoir fro maintenance. A DIN cable connector is provided for ease of wiring. - accessories spare parts - flexible separators - reservoir breathers - suction strainers - T series & Thermotronik series For more information about Buehler tank accessories click here.

 

Top of page